Textil 16 is used to build wall frames on which the silicone stripe of textiles with printout is unbuttoned.
The profile is very slim, is only 16mm deep and after the graphics unbuttoned it becomes almost invisible from the front.
The angle-cut profiles do not require additional processing – just turn them with steel angles with M6 allen screws.
The 16mm profile has two accessory guides, not only does it increase its rigidity, but also gives the possibility of double corners.
The twisted frame can be mounted on the wall using the mounting pin sweltering pendants (drilling required)
The print unbutton with the 15x3mm silicone strap is extremely simple and allows you to present graphics without folds.
Instruction manuals:
