Pro Textil 66 is a one-sided double-walled profile for frames with a printout on textiles trimmed with a silicone stripe.
The total profile depth is 66mm, which is the minimum value for edge backlight without the use of additional light dissipation plates.
It is also sufficient depth to illuminate the standard with the help of the lights located on the back plate.
The maximum backlit frame sizes are 3.0m x 2.0m.
Due to its design, it can be used as:
- freestanding frame – the base is the legs of the aluminium plate 60x10mm (PT1060) in natural colour as well as powder-coated and silver-coated. The back of the frame is a max-thick sandwich plate. 3mm.
- suspended frame – to the ceiling on steel ropes. The installation of the cables requires two holes to be drilled in the upper
edge of the profile. The corners of the frames are twisted using aluminium angles (PT1066)
For larger dimensions, it is recommended that the frame be enforced with the TYP1 boost profile (PTW001) with TYP1 quick installation locks (PT1030).
